Usually in the same local area network, the high-definition encoder can connect the video source device and the video encoder and the computer used to set the control encoder together. It can encode the video and use the RTMP protocol to push the video stream to the streaming media. server. In order to better play the role of the marginal high-definition standard-definition encoder, it is necessary to use it correctly through the following aspects.

1. Installation and connection of equipment

Follow the instructions to correctly connect the power supply, network cable and video input source. After connection, let the signal of the HD and SD encoder successfully connect from the signal source to the input port of the device through the cable.

2. Device login and network configuration

In order to be able to use it smoothly, the wired network port of the high-definition encoder must be connected to the same switch with the computer through a network cable, or directly connected to the computer network port. Then configure the high-definition encoder and the computer to the same network segment through correct operations, so that you can access the encoder's page on the computer, and you can find it by right-clicking the network icon in the lower right corner of windows, which is very convenient.

3. Set coding parameters and function parameters

Open the WEB browser and log in normally, open the web management page of the HD and SD encoder, you can set relevant parameters, such as encoding and functions. You can perform this step according to your needs. In the basic settings menu, you can set some basic functions for the HD and SD encoders to meet the needs of daily use.

The above is the correct way to use the Yukuan high-definition and standard-definition encoder. In addition, operations such as encoding and media streaming are required. You can click on 'Encoding and Media Streaming' to make related settings. In terms of streaming media services, different pushes can be selected, and one stream of the Yukuan HD and SD encoder can run several push services at the same time.