2-ch H.265 H.264 MPEG2 Decoder

发布时间 2019-07-01

点击次数 327

产品名称：
2-ch H.265 H.264 MPEG2 Decoder

上市日期： 2019-07-01

YUK600-02HD 2 channel decoder supports H.265/ H.264/ MPEG2 /AVS+ decoding. It supports ASI/IP input. The device supports multiple resolutions of 1080P/1080I/720P/576I/480I and multiple audio of DRA/AAC/MPEG-Layer II etc.

2-ch H.265 H.264 MPEG2 Decoder

—— YUK600-02HD ——

YUK600-02HD-Video-SDI-audio-input-IP-UDP-SRT-RTMP-output-ASI-output-HEVC-H.265-H.264-MPEG4-MPEG2-HD-SD-decoder-YUKUAN-Technology

Overview

Product Features

l Support multiple input IP/ASI

l Multiple interfaces, HDMI HD/SD-SDI AES-EBU analog stereo ASI IP output

l Support H.265 H.264 MPEG2 AVS+ AVS2 decoding

l Support DRA AAC MPEG-1 AC3 passthrough

l IP 64 (MPTS & SPTS) input over UDP and RTP, support unicast multicast

l 2 ASI input, 2 ASI independent output

l Support mux remux demux function

l Compatible with HD/SD signals

l Support PID remapping, PCR correction

l Resolution can be automatically identified or manually set

l Friendly user interface and easy-to-operate menu system, all operating functions can be completed on the LCD

l Web network management based on B/S

l Support signal input strength, signal to noise ratio (SNR) dynamic display

Specification

ASI Input/Output	TS Over IP
ASI input connector: 2×BNC, 75Ω	Connector: 1×RJ45, 10/100/1000 Base-T
ASI output connector: 2×BNC output independently, 75Ω	Effective bitrate: 600Mb/s
Executive standard: DVB-ASI, EN50083-9	Frame length: (1-7)×188 adjustable bytes
Output bitrate ≤200Mb/s	Transfer protocol: UDP/RTP, support unicast multicast

Audio Decoding	Video Decoding
Audio decoding format: MPEG-1 layer I/II, MPEG-2 layer II, MPEG-2 AAC, MPEG-4	Video decoding format: H.265 HEVC/MPEG4 AVC/ H.264 /MPEG-2/AVS+
AAC LC 2-CHANNEL/5.1 CHANNEL AC3/DRA/EAC3	10 bit, 4:2:0
Bitrate: 64/128/256/384Kbps	Bitrate: 512Kbps-20Mbps
Sampling frequency: 48/44.1/32KHz	Bitrate control: VBR CBR optional
Support volume adjustment

HD/SD-SDI Output	HDMI Output
Connector: BNC,75Ω,	Connector: 2×HDMI
SD-SDI output: SMPTE 259M, 270 Mb/s (10bit)	Embedded audio: 2 channel stereo
HD-SDI output: SMPTE 292M, 1.485 Gbit/s (20bit)	Resolution:1080p30/p25/i60/i50 720p60/p50 576I 480I
Output level: 800mV+-20 p-p
Resolution:1080p30/p25/i60/i50 720p60/p50 576I 480I

Audio Output	Local and Remote Management
2-ch analog stereo audio output	Connector: 1×RJ45, 1000 Base-T
2-ch AES/EBU output	Remote & local control: HTTP Web
Audio output mode: Left, Right, Dual Mono, Stereo	Equipment upgrade: IP

Physical Specifications
Dimension(L×W×H): 450mm×350mm×44mm
Weight: net weight 5KG
Power: AC 90V～250V, 50/60Hz
Power consumption: 24W (excluding LNB power supply)
Temperature range: 0 ~ 45°C(operation), -10 ~ 60°C(storage)
Humidity: 10 ~ 90% (non-condensing)

Related recommended products / more

Modular Multi Channel IRD

Product Physical MapYUK700Product Feature❖ Each device can be inserted 6 modules, coding, decoding, multiplexing, adaptation, modulation, transmission,splitter, satellite receiving and cable receiving are optional ❖ Support program multiplexing output and modulated RF signal output ❖ Support ASI input/output, SDI output can choose any input and output function❖ Gigabit IP input/output and SFP fiber output❖ Support HD input and SD output(with down-transformation function)❖ Support logo superposition and signal generator automatic output❖ IP input support RTP or UDP, support 8 MPTS and 64 SPTS input❖ IP output support RTP or UDP, support 8 MPTS and 64 SPTS output❖ Local monitoring: button and LCD display❖ Remote control: TCP/IP, XML❖ Suppport power cut memory function❖ Standard 1U rack (485mm×450mm×44mm)❖ Plug in card, dual power supply, buzzer alarmModule Option2-ch HD/SD Video Encoder Module 2-ch Audio Encoder Module ❖Input: 2 x HD/SD-SDI, 2 x HDMI ❖Video input format: NTSC/PAL adaptive ❖Input resolution: 1080I@50/59.94/60 720P@50/59.94/60, 576I/50 480I/60❖Encoding format: MPEG-2 H.264 optional❖Output bitrate: VBR, CBR❖Video bitrate: HD 8-20M, SD 2-15M❖Audio input：SDI HDMI embedded audio❖Encoding rate：64K to 384K❖Each module support 2 channel encoding❖Input: 2×analog stereo,2×AES/EBU ❖Audio encoding format: MPEG-1 Layer II, AAC-HE, AAC-LC ❖Sampling frequency: 48KHz❖Audio interface: small XLR❖Audio bitrate: 64 to 384K❖Each module support 2 channel encodingDVB-C/T/T2 ISDBT ATSC Receiver ModuleDVB-S/S2/S2X Receiver Module❖Input: 2×RF input❖Support 2 channel DVB-C/T/T2 ISDBT ATSC input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption❖Input: 2×RF input❖Support 2 channel DVB-S/S2/S2X input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption1-ch Video Decoder Module2-ch Audio Decoder Module❖Output: 1×HD-SDI, 1×HD-SDI (mirror),1×HDMI, 1×analog stereo or digital audio❖Decoding format: H.265, H.264, MPEG2,AVS2, AVS+❖Each module support 1 channel decoding ❖Output: 2×analog stereo and 2×AES/EBU❖Audio decoding format: MPEG-1 Layer II, AAC-HE, AAC-LC❖AES/EBU: 3-pin small XLR connector❖Analog stereo: 5-pin small XLR connector Modulator ModuleLive Streaming Decoder Module❖Support 1×ASI input , 2×ASI loop out and 1×RF output❖Support DVBC, DVBT, DMBT❖Support 16/32/64/128/256/64B/256B QAM❖Each Module support modulation of four adjacent channels ❖Output level: 120dBμV❖Support stream re-multiplexing❖Support PSI/SI automatic or manual insert edit function(PAT, PMT, CAT, NIT, SDT/BAT information sheet)❖Program, PID filtering and re-image❖Support IP input❖Multiple output, HDMI SD/HD-SDI AES/EBU analog stereo❖Support H.265 H.264 MPEG2 AVS+ decoding❖Support RTMP RTSP HLS HTTP SRT❖Support DRA AC3 EAC3 AAC MPEG❖Compatible with HD/SD signals Multiplexer Module4x1 Splitter Module❖Input: 3×ASI, BNC 75Ω❖Output: 2×independent ASI , BNC 75Ω❖Single ASI bitrate: 0 to 200MPS❖Support 1×12G/3G/HD/SD-SDI ASI input❖Support 4×12G/3G/HD/SD-SDI ASI output❖If the power is off, one of the SDI OUT1 can still output SDI input (IN1) normallySDI Fiber Converter Module(Bi-directional)SDI Fiber Converter Module(Uni-Unidirectional)❖Support 1 channel 12G 3G HD SD-SDI, ASI bi-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional❖Support 2 channel 12G 3G HD SD-SDI, ASI uni-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 06 - 04
2-ch 4-ch H.264 Video Encoder

2-ch 4-ch H.264 Video Encoder—— YUK2000 ——YUK2000-2YUK2000-4 Overview YUK2000 series HD/SD encoder is a multi-channel broadcast level professional H.264 MPEG-2 encoder.It supports maximum 4 channel HD/SD-SDI HDMI signal input, 2 channel ASI input, 2 channel ASI output and 1 channel Gigabit IP input output. It’s widely used for High Definition and Standard Definition simultaneous broadcasting for TV channel. Product Features l Support video: 2 channel or 4 channel HD/SD-SDI/HDMI inputl Support audio: HD/SD-SDI embedded audio, HDMI embedded audiol Support video encoding format: H.264 MPEG-2l Support audio encoding format: MPEG-1 LayerII, AAC-HE, AAC-LCl Support VBR and CBR encoding model IP output: output multicast unicast IP stream after multiplexing, IP transport protocol UDP RTPl 2 ASI input, 2 ASI independent output l Support mux re-mux and demux functionl Support High Definition input, Standard Definition program output (with down conversion function)l Support multiple resolutions of 1080I/720P/576I/480Il Support PID remapping, PCR correctionl Support low latency encoding l Support LCD display/key operationl Plug-in two power supplies, support buzzer alarm Specification Basic Information Video Encoding 4×HD/SD-SDI(BNC) input Encoding format:H.264 MPEG-24×HDMI inputBitrate:512Kbps-20Mbps, 4:2:0 8bit2×ASI(BNC) inputBitrate control: VBR CBR optional2×ASI(BNC) outputResolution:1080p30/p25/i60/i50 720p60/p50 576I 480I1×Gigabit IP (RJ45) output (also can be used as IP input)GOP structure: IBBP/IBP optional Audio Encoding TS Over IP Encoding format: MPEG1 LayerII AACProtocol: UDP RTPBitrate: 64/128/256/384KbpsTS over IP output can be turned on and offSampling frequency: 48/44.1/32KHzSupport unicast, multicast modeSupport volume adjustmentThe number of TS packets contained in UDP packets can be adjusted from 1 to 7Support SDI/HDMI embedded audio Stream Output DVB-ASI Serial Data Input Support ASI and IP simultaneous output Connector: BNC, 75ΩSDT parameters can be modifiedData pattern: Byte, Burst adaptiveStream fluctuation can be controlled by turn on or turn off empty packetsPackage length : 188, 204 adaptiveSupport UDP, RTP protocol DVB-ASI Serial Data Output Physical Specifications Connector: BNC, 75ΩTemperature range: 0~+40°C (operation), -20°C~+70°C (storage)Data transfer Rate: 270Mb/sPower: AC 90~260V, 50Hz/60Hz, redundant two power suppliesData pattern: ByteHumidity: ＜85%Package length: 188, 204 optionalDimension(L×W×H):485×350×44(mm) (19 inches 1U rack)Signal level: 800mV±80mVNet Weight: 6.2KG

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01
Digital Audio to Fiber Converter

Digital Audio to Fiber Converter—— YUK200 Series —— YUK200-4 TransmitterReciever YUK200-8 TransmitterReciever YUK200-16（Transmitter & Receiver） Overview YUK200 series digital audio fiber optic extender can transmit 1 to 16 channel unidirectional or 1 to 8 channel bidirectional digital audio signals complying with the AES/EBU standard over 1-core single-mode or multi-mode optical fiber up to 100KM (single mode) or 1KM (multi-mode). Product Features l Input/output AES/EBU signal, compatible with AES3, S/PDIFl Output signal complies with the national standard GY/T156-2000 GY/T158-2000 GY/T187-2002l Input AES signals compatible with various sampling frequencies, making the interconnection of equipment more convenientl Input each AES signal without synchronization, the optical transceiver is equipped with a phase-locked loop self-synchronization functionl Two power supplies redundant backup Specification Video Input Input: 1 to 16 channel unidirectional or 1 to 8 channel bidirectional AES/EBU digital audio inputInput level: 0.2~7.0VP-PInput sampling frequency: 32KHz~108KHzImpedance: 110Ω(balanced)Connector: XLR Audio Output Output: 1 to 16 channel unidirectional or 1 to 8 channel bidirectional AES/EBU digital audio outputOutput level: 5VP-POutput sampling frequency: 48KHz(or request)Rise/Fall Time:Jitter:Impedance: 110Ω(balanced)Connector: XLR Optic and Physical Characteristics Wavelength: 1310nm or 1550nm (Subject to actual measurement)TX power/RX sensitivity: -5dBm~0dBm/-30dBm~-12dBm Power: AC 220VTemperature range: -30°C~+70°C(operation), -20°C~+80°C(storage)Transmission distance: 0~100KM(Actual distance is determined by customer’s requirement)Optical connector: FC/PC or FC/APCDimension:19 inch 1U rack, 48×320×44mmNotes:1.Transmission distance 0-40KM,40-80KM, 80-100KM2.Optical connector FC LC ST SC available

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01
Analog Audio to Fiber Converter

Analog Audio to Fiber Converter—— YUK400 Series —— YUK400-4 TransmitterReciever YUK400-8（Transmitter & Receiver） Overview YUK400 series broadcast-grade analog audio optical transceiver can transmit maximum 8 channel analog mono audio through 1-core single-mode or multi-mode optical fiber, and use 24bit encoding method for analog-to-digital conversion of analog audio signals. This device is capable of delivering reliable broadcast-grade high-quality transmissions. The transmission distance can reach up to 100km (single-mode fiber) and 1km (multi-mode fiber). Product Features l 24bit digital encodingl Single-stage transmission distance up to 100KMl Uni-directional and bi-directional transmission availablel System topology can be point-to-point, point-to-multipointl Large audio dynamic rangel Plug and playl The working status is clearly indicated, and the panel is equipped with LED indicators for input/output audio, optical signal, internal status, and power supply Specification Video Input Input: 1 to 8 channel analog mono audio for 1U rack (9 to 16 channel analog mono audio for 2U rack available)Frequency bandwidth: 20Hz~20KHz@-0.5dBMaximum input level: 17.4VP-P（+18dBm)Input impedance: 600Ω(balanced)Connector: XLR Audio Output Output: 1 to 8 channel analog mono audio for 1U rack (9 to 16 channel analog mono audio for 2U rack available)Frequency bandwidth: 20Hz~0KHz@-0.5dBMaximum input level: 17.4VP-P（+18dBm)Signal to noise ratio: ＞86dB(Unweighted）Total harmonic distortion: ＜0.2%Channel isolation: ＞90dB@1KHz ＞90dB@20KHz Optic and Physical Characteristics Wavelength: 1310nm or 1550nm (Subject to actual measurement)TX power/RX sensitivity: -5dBm~0dBm/-30dBm~-12dBm Power: AC 220VTemperature range: -30°C~+70°C(operation), -20°C~+80°C(storage)Transmission distance: 0~100KM(Actual distance is determined by customer’s requirement)Optical connector: FC/PC or FC/APCDimension:19 inch 1U rack, 48×320×44mmNotes:1.Transmission distance 0-40KM,40-80KM, 80-100KM2.Optical connector FC LC ST SC available

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01

Products / 相关产品

2-ch H.265 H.264 MPEG2 Decoder

2019 - 07 - 01

2-ch H.265 H.264 MPEG2 De...

more>>