您现在的位置： Home > Products > Video Audio IP RF Over Fiber > SDI ASI Ethernet to Fiber Converter

产品名称

Muti Channel SDI Ethernet to Fiber

发布时间 2019-07-01

点击次数 382

产品名称：
Muti Channel SDI Ethernet to Fiber

上市日期： 2019-07-01

YUK100-HD-IP series fiber optic extender (1U rack mounted type) can transmit 1 to 7 channel unidirectional or 1 to 3 channel bidirectional 3G-SDI signal and 1 channel Gigabit Ethernet network over 1-core single model or multi-mode fiber, downward compatible with HD-SDI,SD-SDI and DVB-ASI signal. It provides reliable high quality transmission up to 100KM (single mode fiber) and 0.5KM (multi-mode fiber).

YUK100-HD-IP series is a high-reliability, high-performance digital optical transmission equipment suitable for the broadcast and television industry, with broadcast-level transmission quality, full real-time transmission, no delay.

Muti Channel SDI + Ethernet to Fiber Converter

—— YUK100-HD-IP Series ——

YUK100-07HD-IP-T-12G-3G-HD-SDI-IP-video-to-over-single-fiber-converter-extender-transmitter-receiver-Yukuan-Technology-Ltd

Transmitter

YUK100-07HD-IP-R-12G-3G-HD-SDI-IP-video-to-over-single-fiber-converter-extender-transmitter-receiver-Yukuan-Technology-Ltd

Receiver

Overview

Product Features

l Bi-directional or uni-directional transmission of independent 3G-SDI signals or TS stream signals based on DVB-ASI interface and Gigabit Ethernet over the same 1-core fiber

l Compatible with HD-SDI, SD-SDI and DVB-ASI, adaptive signals HD-SDI, SD-SDI, ASI

l Support maximum 1080P50/60

l Each input channel has loop-out, and each output chanel has two outputs

l Support pathological signal

l Unidirectional or bi-directional transmission available

l Optical connector FC LC ST SC are available

l The unique frame structure is used to ensure that the multi channel signals are in one-to-one correspondence between the sending and receiving ends

l Supports uniform mode MTS and burst mode MTS signals

l Large signal capacity, the maximum data rate of each SDI channel can reach 2.5Gbps

l Complete physical layer multiplexing and high-precision PCR correction, the average PCR jitter is maintained at 30 ~ 60ns

l Digital transmission meets the requirements of high-quality image transmission and can reach broadcast-level transmission quality

l The optical receiver has high receiving sensitivity (-30dBm) to ensure long-distance transmission of signals without repeaters

l Transmission distance optional 0-40KM,40-80KM, 80-100KM

l High definition TV signal format: HDI 143,177,270,360,540,1485,2500Mbps

l Comply with SMPTE259M,SMPTE297M,SMPTE310,SMPTE305(HDTI),SMPTE344, SMPTE292M, SMPTE424M

l SDI input has cable equalization and can compensate the loss of cable transmission

l Redundant two power supplies

Specification

Video Input

Input: multi channel 3G-SDI, DVB-ASI, Gigabit Ethernet

Input level: >380mVP-P

Input automatic cable equalization: >100m(1485Mbps)(BELDEN8281 cable), >250m(270Mbps)(BELDEN8281 cable)

Input reflection loss: >16dB@270Mbps, >15dB@1485Mbps, >10dB@2970Mbps

Input resolution: 1080P(1920x1080)@25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz

1080I(1920x1080)@25Hz, 29.97Hz, 720P(1280x720)@50Hz , 59.94Hz

576I(720x576)@25Hz, 480I(720x480)@29.97Hz

Impedance: 75Ω

Connector: BNC

Video Output

Output: multi channel 3G-SDI, DVB-ASI, Gigabit Ethernet

Output level: 800mVP-P±10%

Rise/fall time: < 135ps(HD/3G), < 800ps(SD)

Maximum jitter: < 0.1UI@270 Mbps < 0.2UI@1485 Mbps < 0.3UI@2.97Gb/s

Impedance: 75Ω

Connector: BNC

Optic and Physical Characteristics

Wavelength: from 1310nm to 1610nm(depends on channel quantity)

TX power/RX sensitivity: -5dBm~0dBm/-30dBm~-12dBm

Transmission distance: 0~100KM(Actual distance is determined by customer’s requirement)

Optical connector: FC LC ST SC are available

Power supply: 100~240V, 0.8A, 50/60Hz

Temperature range: -30°C~+70°C(operation), -20°C~+80°C(storage)

Dimension: 19 inch 1U rack, 485×320×44mm

Related recommended products / more

Modular Type 3G-SDI distributor

Modular Type 3G-SDI distributor—— YUK700-506 ——1U chassis2U chassis Overview YUK700-506 series is a modular-type 3G-SDI distributor. The platform adopts a modular card design. 1U chassis supports up to six 3G-SDI 1x4 distribution. 2U chassis supports up to twelve 3G-SDI 1x4 distribution Product Features l Support 3G-SDI, HD-SDI, SD-SDI, DVB-ASI signal, SMPTE 259M, SMPTE 292M format signal, and digital signals with bit rate between 10Mbps and 1.485Gbpsl Each module supports one 1*4 distributionl 1U chassis supports 6 modules, 2U chassis support 12 modulesl Support power off pass through. If the power is off, one of the SDI OUT1(SDI OUT1 next to the SDI IN1) can still output SDI input (IN1) normallyl Support cable equalization and clock recovery Specification Input Signal Format: 3G-SDI, HD-SDI, SD-SDI, DVB-ASIReturn Loss: 15dB@2970Mbps, 15dB@1485MbpsInput Automatic Cable Equalization: 250m@270Mbps (Equivalent Belden1694A cable) 100m@1485Mbps (Equivalent Belden1694A cable)Impedance: 75ΩConnector: BNC Output Signal Format: 3G-SDI, HD-SDI, SD-SDI, DVB-ASIImpedance: 75ΩConnector: BNCAmplitude: 800mVp-p±10% Index Shaking: ＜0.2UIOvershoot: ＜10% rangeRise/fall Time:Power Consumption: 4W Operation Environment Operation Temperature: 0 ~ +55℃Power: AC 110~260V 50Hz/60HzRelative Humidity: 10% ~ 90%Dimension: 19’’ 1U rack 482×370×44(mm), 19’’ 2U rack 482×370×88(mm)

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2024 - 02 - 01
4K IRD

4K Integrated Receiver Decoder—— YUK700-RD —— Overview YUK700-RD DVB-S/S2/S2X professional 4K integrated receiver decoder supports H.265 H.264 MPEG-2 AVS+ AVS2 decoding. The front panel comes with two Gigabit IP inputs and outputs and optional two SFP optical port inputs and outputs.1U chassis can maximum inserted with 6 cards. RF receiver card (one slot), ASI multiplexer card (one slot) and 4K decoding card (two slots), and can be selected according to specific needs.One RF receiver card supports 2 channel RF receiving, optional DVB-S/S2/S2X/C/T/T2 ISDBT ATSC. Two sets CAM cards to descramble different signals, support BISS-1 and BISS-E decryption. One ASI multiplexer card supports 3 ASI input 2 ASI output. One 4K decoder card supports 1 HDMI/1x12G-SD/4x3G-SDI/1 analog stereo/1 AES/EBU output, supports optional output 2x 25G FPC interface SMPTE 2110, supports 3840*2160/1080P/ 1080I/720P/576I/480I multiple resolutions, supports DRA/AC3/EAC3/AAC/MPEG-1 and other audio. Product Features l Support multiple input RF IP ASIl Multiple output, 1x12G-SDI, 4×3G-SDI(4K signal), 1xHDMI 2.0,1x analog stereo, 1x AES/EBU, ASI IP l Support optional output 2x 25G FPC interface SMPTE 2110l Support H.265 H.264 MPEG-2 AVS+ decodingl Support DRA AAC MPEG-1 EAC3 AC3 passthroughl Chromacity support 4:2:2 10bit /4:2:0 8bitl Demodulator + descrambler +re-mux+ decoder in one devicel CI descrambling supports NDS, Irdeto and other conditional access systems. Adopt unique digital decoding technology and dual PCMCIA interface, receive various encrypted satellite cable terrestrial digital TV signals by replacing different PCMCIA modulesl Support BISS-1 and BISS-E decryptionl Support resolution 2160P(3840×2160)@25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz1080P(1920x1080)@25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz1080I(1920x1080)@25Hz, 29.97Hz720P(1280x720)@50Hz, 59.94Hz 576I(720x576)@25Hz480I(720x480)@29.97Hzl Resolution can be automatically identified or manually setl Friendly user interface and easy-to-operate menu system, all operating functions can be completed on the LCDl Web network management based on B/Sl Support signal input strength, signal to noise ratio (SNR) dynamic display Specification RF Input(DVB-S/S2/S2X) InputInput Frequency1×RF input, 1×RF loop, 75Ω950~2150MHzStandardHalf SyQuest Baseband filler(Roll off factor)DVB-S compliant0.35 for DVB-SDVB-S2/S2X compliant0.15 to 0.35 for DVB-S2VCM and ACM supported0.05 to 0.35 for DVB-S2XLNB Power SupplyFEC13V/18V/turn off, 22KHzll ratios compatible with standardsSupported Code RateMaximum Symbol Rate(DVB-S)DVB-S:Symbol rates: 1-54MSpsQPSK: 1/2, 2/3, 3/4, 4/5, 5/6, 7/8Maximum Symbol Rate (DVB-S2/S2X)DVB-S2:Normal(64800 bits) FECFRAME Symbol Rates:QPSK: 1/4, 1/3, 2/5, 1/2, 3/5, 2/3, 3/4, 4/5, 5/6QPSK 1-60MSps 8/9, 9/10 8PSK 1-60MSps8PSK: 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/1016APSK 1-58MSps16APSK: 2/3, 3/4, 4/5, 5/6, 8/9, 9/1032APSK 1-55MSps32APSK: 3/4, 4/5, 5/6, 8/9, 9/1064APSK 1-34MSps RF Input(DVB-T/T2) RF Input(DVB-C) Standard: DVB-T/T2Standard: DVB-CInput: 1×RF input, 1×RF loop, 75ΩInput: 1×RF input, 1×RF loop, 75ΩInput frequency: 44～1002MHzInput frequency: 48～862MHzInput level: -25 ～ -100dbmInput level: 45～75dbuVCarrier mode: DVB-T 2K/8K DVB-T2 1K, 2K, 4K, 8K, 16K, 32K ASI Input/Output TS Over IP ASI input connector: 3×BNC, 75ΩConnector:2×Gigabit IP output, RJ45ASI output connector: 2×BNC , 75Ω(IP1 port also support IP input)Executive standard: DVB-ASI, EN50083-9Effective bitrate: 600Mb/sOutput bitrate ≤200Mb/sFrame length: (1-7)×188 adjustable bytesTransfer protocol: UDP/RTP, support unicast multicast ASI Input/Output TS Over IP ASI input connector: 2×BNC, 75ΩConnector: 1×RJ45, 10/100/1000 Base-TASI output connector: 2×BNC , 75Ω Effective bitrate: 600Mb/sExecutive standard: DVB-ASI, EN50083-9Frame length: (1-7)×188 adjustable bytesOutput bitrate ≤200Mb/sTransfer protocol: UDP/RTP, support unicast multicast Video Decoding Audio Decoding Video decoding format: H.265 HEVC/MPEG4/ H.264 AVC/MPEG-2/AVS+/AVS2Audio decoding format: MPEG-1 layer I/II，MPEG-4 H.264 AVC/MPEG-2/AVS+/AVS2AAC LC 2-CHANNEL/5.1 CHANNEL AC3/DRA/EAC3Video output standard: PAL NTSC 720P 1080i 1080P 3840×2160P(UltraHD) Audio output mode: LPCM (decoding), RAW 1080P 3840×2160P(UltraHD) (transparent transmission), MULTI CH (multi-channel)Video signal output aspect ratio: 4:3, 16:9, 16:10Audio output volume: 0-31 Output Local and Remote Management HD-SDI: 4×BNC, SMPTE-259/292/424, support 2SI and Quadrant mapping methodsConnector: 1×RJ45, 1000 Base-TQuadrant mapping methodsRemote control: HTTP Web12G-SDI: 1xBNCLocal control: HTTP Web HDMI: 1xHDMI 1.4/2.0 HDMI type AEquipment upgrade: IPFPC: 2x25G FPC interface, support SMPTE 2110 (optional)Audio: 1-ch analog stereo L & R audio (2x small XLR), 1-chAES/EBU(1x small XLR) Physical Specifications Dimension(L×W×H): 480×350×44mm, 19’’ 1U rackWeight: net weight 6.3KGPower: AC 90V～250V, 50/60HzPower consumption: 24W (excluding LNB power supply)Temperature range: 0 ~ 45°C(operation), -10 ~ 60°C(storage)Humidity: 10 ~ 90% (non-condensing)

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01
Multi-channel video IRD

Multi-channel video IRD —— YUK700 ——Product Feature❖ Each device can be inserted 6 modules, coding, decoding, multiplexing, adaptation, modulation, transmission,splitter, satellite receiving and cable receiving are optional ❖ Support program multiplexing output and modulated RF signal output ❖ Support ASI input/output, SDI output can choose any input and output function❖ Gigabit IP input/output and SFP fiber output❖ Support HD input and SD output(with down-transformation function)❖ Support logo superposition and signal generator automatic output❖ IP input support RTP or UDP, support 8 MPTS and 64 SPTS input❖ IP output support RTP or UDP, support 8 MPTS and 64 SPTS output❖ Local monitoring: button and LCD display❖ Remote control: TCP/IP, XML❖ Suppport power cut memory function❖ Standard 1U rack (485mm×450mm×44mm)❖ Plug in card, dual power supply, buzzer alarmModule Option2-ch HD/SD Video Encoder Module 2-ch Audio Encoder Module ❖Input: 2 x HD/SD-SDI, 2 x HDMI ❖Video input format: NTSC/PAL adaptive ❖Input resolution: 1080I@50/59.94/60 720P@50/59.94/60, 576I/50 480I/60❖Encoding format: MPEG-2 H.264 optional❖Output bitrate: VBR, CBR❖Video bitrate: HD 8-20M, SD 2-15M❖Audio input：SDI HDMI embedded audio❖Encoding rate：64K to 384K❖Each module support 2 channel encoding❖Input: 2×analog stereo,2×AES/EBU ❖Audio encoding format: MPEG-1 Layer II, AAC-HE, AAC-LC ❖Sampling frequency: 48KHz❖Audio interface: small XLR❖Audio bitrate: 64 to 384K❖Each module support 2 channel encodingDVB-C/T/T2 ISDBT ATSC Receiver ModuleDVB-S/S2/S2X Receiver Module❖Input: 2×RF input❖Support 2 channel DVB-C/T/T2 ISDBT ATSC input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption❖Input: 2×RF input❖Support 2 channel DVB-S/S2/S2X input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption1-ch Video Decoder Module2-ch Audio Decoder Module❖Output: 1×HD-SDI, 1×HD-SDI (mirror),1×HDMI, 1×analog stereo or digital audio❖Decoding format: H.265, H.264, MPEG2,AVS2, AVS+❖Each module support 1 channel decoding ❖Output: 2×analog stereo and 2×AES/EBU❖Audio decoding format: MPEG-1 Layer II, AAC-HE, AAC-LC❖AES/EBU: 3-pin small XLR connector❖Analog stereo: 5-pin small XLR connector Modulator ModuleLive Streaming Decoder Module❖Support 1×ASI input , 2×ASI loop out and 1×RF output❖Support DVBC, DVBT, DMBT❖Support 16/32/64/128/256/64B/256B QAM❖Each Module support modulation of four adjacent channels ❖Output level: 120dBμV❖Support stream re-multiplexing❖Support PSI/SI automatic or manual insert edit function(PAT, PMT, CAT, NIT, SDT/BAT information sheet)❖Program, PID filtering and re-image❖Support IP input❖Multiple output, HDMI SD/HD-SDI AES/EBU analog stereo❖Support H.265 H.264 MPEG2 AVS+ decoding❖Support RTMP RTSP HLS HTTP SRT❖Support DRA AC3 EAC3 AAC MPEG❖Compatible with HD/SD signals Multiplexer Module4x1 Splitter Module❖Input: 3×ASI, BNC 75Ω❖Output: 2×independent ASI , BNC 75Ω❖Single ASI bitrate: 0 to 200MPS❖Support 1×12G/3G/HD/SD-SDI ASI input❖Support 4×12G/3G/HD/SD-SDI ASI output❖If the power is off, one of the SDI OUT1 can still output SDI input (IN1) normallySDI Fiber Converter Module(Bi-directional)SDI Fiber Converter Module(Uni-Unidirectional)❖Support 1 channel 12G 3G HD SD-SDI, ASI bi-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional❖Support 2 channel 12G 3G HD SD-SDI, ASI uni-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 06 - 04
2-ch 4-ch H.264 Video Encoder

2-ch 4-ch H.264 Video Encoder—— YUK2000 ——YUK2000-2YUK2000-4 Overview YUK2000 series HD/SD encoder is a multi-channel broadcast level professional H.264 MPEG-2 encoder.It supports maximum 4 channel HD/SD-SDI HDMI signal input, 2 channel ASI input, 2 channel ASI output and 1 channel Gigabit IP input output. It’s widely used for High Definition and Standard Definition simultaneous broadcasting for TV channel. Product Features l Support video: 2 channel or 4 channel HD/SD-SDI/HDMI inputl Support audio: HD/SD-SDI embedded audio, HDMI embedded audiol Support video encoding format: H.264 MPEG-2l Support audio encoding format: MPEG-1 LayerII, AAC-HE, AAC-LCl Support VBR and CBR encoding model IP output: output multicast unicast IP stream after multiplexing, IP transport protocol UDP RTPl 2 ASI input, 2 ASI independent output l Support mux re-mux and demux functionl Support High Definition input, Standard Definition program output (with down conversion function)l Support multiple resolutions of 1080I/720P/576I/480Il Support PID remapping, PCR correctionl Support low latency encoding l Support LCD display/key operationl Plug-in two power supplies, support buzzer alarm Specification Basic Information Video Encoding 4×HD/SD-SDI(BNC) input Encoding format:H.264 MPEG-24×HDMI inputBitrate:512Kbps-20Mbps, 4:2:0 8bit2×ASI(BNC) inputBitrate control: VBR CBR optional2×ASI(BNC) outputResolution:1080p30/p25/i60/i50 720p60/p50 576I 480I1×Gigabit IP (RJ45) output (also can be used as IP input)GOP structure: IBBP/IBP optional Audio Encoding TS Over IP Encoding format: MPEG1 LayerII AACProtocol: UDP RTPBitrate: 64/128/256/384KbpsTS over IP output can be turned on and offSampling frequency: 48/44.1/32KHzSupport unicast, multicast modeSupport volume adjustmentThe number of TS packets contained in UDP packets can be adjusted from 1 to 7Support SDI/HDMI embedded audio Stream Output DVB-ASI Serial Data Input Support ASI and IP simultaneous output Connector: BNC, 75ΩSDT parameters can be modifiedData pattern: Byte, Burst adaptiveStream fluctuation can be controlled by turn on or turn off empty packetsPackage length : 188, 204 adaptiveSupport UDP, RTP protocol DVB-ASI Serial Data Output Physical Specifications Connector: BNC, 75ΩTemperature range: 0~+40°C (operation), -20°C~+70°C (storage)Data transfer Rate: 270Mb/sPower: AC 90~260V, 50Hz/60Hz, redundant two power suppliesData pattern: ByteHumidity: ＜85%Package length: 188, 204 optionalDimension(L×W×H):485×350×44(mm) (19 inches 1U rack)Signal level: 800mV±80mVNet Weight: 6.2KG

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01

Products / 相关产品

Muti Channel SDI Ethernet to Fiber

2019 - 07 - 01

Muti Channel SDI + Ethern...

more>>