Muti Channel SDI + Ethernet to Fiber Converter
——     YUK100-HD-IP Series     ——

Transmitter

Receiver
    Overview                                                                                                                                                                                  
YUK100-HD-IP series fiber optic extender (1U rack mounted type) can transmit 1 to 7 channel unidirectional or 1 to 3 channel bidirectional 3G-SDI signal and 1 channel Gigabit Ethernet network over 1-core single model or multi-mode fiber, downward compatible with HD-SDI,SD-SDI and DVB-ASI signal. It provides reliable high quality transmission up to 100KM (single mode fiber) and 0.5KM (multi-mode fiber). 
YUK100-HD-IP series is a high-reliability, high-performance digital optical transmission equipment suitable for the broadcast and television industry, with broadcast-level transmission quality, full real-time transmission, no delay. 
                                                                                                                                                                  
    Product Features                                                                                                                                                                    
l  Bi-directional or uni-directional transmission of independent 3G-SDI signals or TS stream signals based on DVB-ASI interface and Gigabit Ethernet over the same 1-core fiber
l  Compatible with HD-SDI, SD-SDI and DVB-ASI, adaptive signals HD-SDI, SD-SDI, ASI
l  Support maximum 1080P50/60
l  Each input channel has loop-out, and each output chanel has two outputs
l  Support pathological signal 
l  Unidirectional or bi-directional transmission available
l  Optical connector FC LC ST SC are available
l The unique frame structure is used to ensure that the multi channel signals are in one-to-one correspondence between the sending and receiving ends
l  Supports uniform mode MTS and burst mode MTS signals
l  Large signal capacity, the maximum data rate of each SDI channel can reach 2.5Gbps
l  Complete physical layer multiplexing and high-precision PCR correction, the average PCR jitter is maintained at 30 ~ 60ns
l  Digital transmission meets the requirements of high-quality image transmission and can reach broadcast-level transmission quality
l  The optical receiver has high receiving sensitivity (-30dBm) to ensure long-distance transmission of signals without repeaters
l  Transmission distance optional 0-40KM,40-80KM, 80-100KM
l  High definition TV signal format: HDI 143,177,270,360,540,1485,2500Mbps
l  Comply with SMPTE259M,SMPTE297M,SMPTE310,SMPTE305(HDTI),SMPTE344, SMPTE292M, SMPTE424M
l  SDI input has cable equalization and can compensate the loss of cable transmission
l  Redundant two power supplies
    Specification                                                                                                                                                                            
| Video Input | 
| Input: multi channel 3G-SDI, DVB-ASI, Gigabit Ethernet | 
| Input level: >380mVP-P | 
| Input automatic cable equalization: >100m(1485Mbps)(BELDEN8281 cable), >250m(270Mbps)(BELDEN8281 cable)    | 
| Input reflection loss: >16dB@270Mbps, >15dB@1485Mbps, >10dB@2970Mbps | 
| Input resolution: 1080P(1920x1080)@25Hz,29.97Hz,30Hz,50Hz,59.94Hz,60Hz | 
|                                1080I(1920x1080)@25Hz, 29.97Hz, 720P(1280x720)@50Hz , 59.94Hz   | 
|                                576I(720x576)@25Hz, 480I(720x480)@29.97Hz  | 
| Impedance: 75Ω | 
| Connector: BNC | 
| 
 | 
| Video Output | 
| Output: multi channel 3G-SDI, DVB-ASI, Gigabit Ethernet      | 
| Output level: 800mVP-P±10% | 
| Rise/fall time: < 135ps(HD/3G), < 800ps(SD) | 
| Maximum jitter: < 0.1UI@270 Mbps < 0.2UI@1485 Mbps < 0.3UI@2.97Gb/s | 
| Impedance: 75Ω | 
| Connector: BNC | 
| 
 | 
| Optic and Physical Characteristics | 
| Wavelength: from 1310nm to 1610nm(depends on channel quantity)  | 
| TX power/RX sensitivity: -5dBm~0dBm/-30dBm~-12dBm | 
| Transmission distance: 0~100KM(Actual distance is determined by customer’s requirement) | 
| Optical connector: FC LC ST SC are available | 
| Power supply: 100~240V, 0.8A, 50/60Hz | 
| Temperature range: -30°C~+70°C(operation), -20°C~+80°C(storage) | 
| Dimension: 19 inch 1U rack, 485×320×44mm |