RF L-band Switcher

——     YUK-SW01-L     ——

One Channel RF L-band Switcher

——     YUK-SW02-L     ——

Two Channel RF L-band Switcher

    Overview                                                                                                                                                                                 

YUK-SW02-L 1U rack-mounted L-band RF switch is an RF  switching system suitable for satellite signal transmission systems. This device supports automatic and manual switching. In the automatic switching mode, the switching level threshold of each channel can be set individually. In the manual switching mode, channel switching can be forced, and the level switching threshold of the working channel can be set. After reaching the switching threshold, it can automatically switch to another channel or force no switching.

YUK-SW02-L equipment support unified network management and point-to-point remote control (point-to-point remote control needs to purchase a remote control terminal separately).

This device has a complete horizontal and vertical power supply function.

    Product Features                                                                                                                                                                    

l  Working RF frequency: 950MHz~2750MHz

l  RF input level has a wide operating range

l  Horizontal polarization H/vertical polarization V switching

l  LNB tuner power supply on/off control

l  Low power consumption design, low heat, high stability, meet the requirements of environmental protection

l  Automatic switching and manual switching function, forced manual switching function

l  The front panel has a test port for RF output -20dB

l  With buzzer alarm and monitoring parameters and report to the network management system

l  Intelligent design, configuration parameters can be set locally/remotely, and can be connected to the system network management or point-to-point remote control

l  The display screen actively displays the current working channel and the level value of each channel

    Operation Mode                                                                                                                                                                    

Depending on the actual application, the user can choose from several working modes. These modes can be divided into automatic switching control or manual switching control.

Auto Switch Mode

In the automatic switching mode, the switching level threshold of each channel can be set independently. The main and auxiliary channels can be set, and it can be set to allow or not allow the main channel to automatically switch back to the main channel after the signal is restored.

Manual Switch Mode

In manual mode, the working channel can be manually set according to user’s needs, and can be forced to switch to another channel.

Mode settings are stored in the module's non-volatile memory. When powered up, the module will revert to the operating mode settings it was in before the last power outage. When the power is turned off, the A channel of the device can transmit signals normally, but other functions are unavailable.

Fast Switching Function

The device has a fast switching function. Press and hold the corresponding button for 3 seconds to perform a fast channel switching function.

    Specification                                                                                                                                                                          

RF frequency range: 950～2750MHz 

Frequency response flatness: ± 0.5dB (950~2150MHz), ± 0.75dB (950~2750MHz)

RF output connector: F type, 75Ω

RF input level range: 60～120dBuV

Switching level range: according to user settings

Insertion loss:≤3dB

Reflection loss: ≤-14dB

RF monitoring port level: -20±1.0 dBuV

Port isolation: ≥75dB (950~2000MHz), ≥70dB (2000~2750MHz)

Switch time: ≤8ms