-
![Modular Multi Channel IRD]( "Modular Multi Channel IRD")
Product Physical MapYUK700Product Feature❖ Each device can be inserted 6 modules, coding, decoding, multiplexing, adaptation, modulation, transmission,splitter, satellite receiving and cable receiving are optional ❖ Support program multiplexing output and modulated RF signal output ❖ Support ASI input/output, SDI output can choose any input and output function❖ Gigabit IP input/output and SFP fiber output❖ Support HD input and SD output(with down-transformation function)❖ Support logo superposition and signal generator automatic output❖ IP input support RTP or UDP, support 8 MPTS and 64 SPTS input❖ IP output support RTP or UDP, support 8 MPTS and 64 SPTS output❖ Local monitoring: button and LCD display❖ Remote control: TCP/IP, XML❖ Suppport power cut memory function❖ Standard 1U rack (485mm×450mm×44mm)❖ Plug in card, dual power supply, buzzer alarmModule Option2-ch HD/SD Video Encoder Module 2-ch Audio Encoder Module ❖Input: 2 x HD/SD-SDI, 2 x HDMI ❖Video input format: NTSC/PAL adaptive ❖Input resolution: 1080I@50/59.94/60 720P@50/59.94/60, 576I/50 480I/60❖Encoding format: MPEG-2 H.264 optional❖Output bitrate: VBR, CBR❖Video bitrate: HD 8-20M, SD 2-15M❖Audio input：SDI HDMI embedded audio❖Encoding rate：64K to 384K❖Each module support 2 channel encoding❖Input: 2×analog stereo,2×AES/EBU ❖Audio encoding format: MPEG-1 Layer II, AAC-HE, AAC-LC ❖Sampling frequency: 48KHz❖Audio interface: small XLR❖Audio bitrate: 64 to 384K❖Each module support 2 channel encodingDVB-C/T/T2 ISDBT ATSC Receiver ModuleDVB-S/S2/S2X Receiver Module❖Input: 2×RF input❖Support 2 channel DVB-C/T/T2 ISDBT ATSC input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption❖Input: 2×RF input❖Support 2 channel DVB-S/S2/S2X input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption1-ch Video Decoder Module2-ch Audio Decoder Module❖Output: 1×HD-SDI, 1×HD-SDI (mirror),1×HDMI, 1×analog stereo or digital audio❖Decoding format: H.265, H.264, MPEG2,AVS2, AVS+❖Each module support 1 channel decoding ❖Output: 2×analog stereo and 2×AES/EBU❖Audio decoding format: MPEG-1 Layer II, AAC-HE, AAC-LC❖AES/EBU: 3-pin small XLR connector❖Analog stereo: 5-pin small XLR connector Modulator ModuleLive Streaming Decoder Module❖Support 1×ASI input , 2×ASI loop out and 1×RF output❖Support DVBC, DVBT, DMBT❖Support 16/32/64/128/256/64B/256B QAM❖Each Module support modulation of four adjacent channels ❖Output level: 120dBμV❖Support stream re-multiplexing❖Support PSI/SI automatic or manual insert edit function(PAT, PMT, CAT, NIT, SDT/BAT information sheet)❖Program, PID filtering and re-image❖Support IP input❖Multiple output, HDMI SD/HD-SDI AES/EBU analog stereo❖Support H.265 H.264 MPEG2 AVS+ decoding❖Support RTMP RTSP HLS HTTP SRT❖Support DRA AC3 EAC3 AAC MPEG❖Compatible with HD/SD signals Multiplexer Module4x1 Splitter Module❖Input: 3×ASI, BNC 75Ω❖Output: 2×independent ASI , BNC 75Ω❖Single ASI bitrate: 0 to 200MPS❖Support 1×12G/3G/HD/SD-SDI ASI input❖Support 4×12G/3G/HD/SD-SDI ASI output❖If the power is off, one of the SDI OUT1 can still output SDI input (IN1) normallySDI Fiber Converter Module(Bi-directional)SDI Fiber Converter Module(Uni-Unidirectional)❖Support 1 channel 12G 3G HD SD-SDI, ASI bi-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional❖Support 2 channel 12G 3G HD SD-SDI, ASI uni-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional
会员价：
￥
0
RMB
市场价：
￥
0
RMB
发布时间：
2019
-
06
-
04
-
![1 ch HD SD Encoder with Mux]( "1 ch HD SD Encoder with Mux")
Product Physical Map YUK2000-1Product Feature❖ Support video input: one channel HD/SD-SDI HDMI input❖ Support audio input: HD/SD-SDI embedded audio, HDMI embedded audio, AES/EBU, analog stereo❖ Support encoding format: H.264 MPEG-2❖ Support VBR and CBR encoding mode❖ IP input: 1 Gigabit RJ45 to input multicast IP stream❖ IP output: output multicast IP stream after multiplexing, IP transport protocol UDP RTP❖ 2 ASI input, 2 ASI output independently❖ Support re-mux and demux function❖ Support High Definition input, Standard Definition program output (with down conversion function)❖ Support multiple resolutions of 1080I/720P/576I/480I❖ Support PID remapping, PCR correction❖ Support low latency encoding ❖ Support LCD display/key operation❖ Plug-in dual power supply, support buzzer alarmSpecificationParameterTypical ValueBasic InformationInput1×HD/SD-SDI(BNC), 1×HDMI, 1×AES/EBU(XLR)1×analog stereo(XLR), 2×ASI(BNC)Output2×ASI(BNC), 1×Gigabit IP (RJ45) (also can be used as IP input)Video EncodingEncoding FormatH.264 MPEG-2Bitrate512Kbps-20Mbps, 4:2:0 8bitBitrate ControlVBR CBR optionalResolution576i/ 576p/ 720p/ 1080 50i/ 1080 60iGOP StructureIBBP/IBP optionalAudio EncodingEncoding FormatMPEG1 LayerII, AAC-LC, AAC-HEBitrate64/128/256/384KbpsSampling Frequency48/44.1/32KHzSupport volume adjustmentSupport SDI/HDMI embedded audioTS Over IPProtocolUDP RTPTS over IP output can be turned on and offSupport unicast, multicast modeThe number of TS packets contained in UDP packets can be adjusted from 1 to 7The IP output protocol is implemented by FPGA hardware. After the transmission link is restored, the signal is restored instantly.Stream OutputSupport ASI and IP simultaneous outputSDT parameters can be modifiedStream fluctuation can be controlled by turn on or turn off empty packetsSupport UDP, RTP protocolDVB-ASI Serial Data InputConnectorBNC, 75ΩData PatternByte, Burst adaptivePackage Length188, 204 adaptiveDVB-ASI Serial Data OutputConnectorBNC, 75ΩData Transfer Rate270Mb/sData PatternBytePackage Length188, 204 optionalSignal Level800mV±80mVPhysical SpecificationsTemperature Range0~+40℃(operation), -20℃~+70℃(storage)PowerAC 90~260V, 50Hz/60Hz, redundant twp power suppliesHumidity＜85%Dimension(L×W×H)485mm×350mm×44mm(19 inches 1U chassis)Net Weight6.2KG
会员价：
￥
0
RMB
市场价：
￥
0
RMB
发布时间：
2019
-
07
-
01
-
![2 to 4 ch H.264 Encoder]( "2 to 4 ch H.264 Encoder")
Product Physical MapYUK2000-2YUK2000-4Product Feature❖ Support video: maximum 4 channel HD/SD-SDI HDMI input❖ Support audio: HD/SD-SDI embedded audio, HDMI embedded audio❖ Support encoding format: H.264 MPEG-2❖ Support CBR and VBR❖ IP output: output multicast unicast IP stream after multiplexing, IP transport protocol UDP RTP❖ 2 ASI input, 2 ASI independent output❖ Support mux re-mux and demux function❖ Support High Definition input, Standard Definition program output (with down conversion function)❖ Support multiple resolutions of 1080I/720P/576I/480I❖ Support PID remapping, PCR correction❖ Support low latency encoding❖ Support LCD display/key operation❖ Plug-in two power supplies, support buzzer alarmSpecificationParameterTypical ValueBasic InformationInputMax 4×HD/SD-SDI(BNC), 4×HDMI, 2×ASI(BNC)Output2×ASI(BNC), 1×Gigabit IP (RJ45) (also can be used as IP input)Video EncodingEncoding FormatH.264 MPEG-2Bitrate512Kbps-20Mbps, 4:2:0 8bitBitrate ControlVBR CBR optionalResolution576i/ 576p/ 720p/ 1080 50i/ 1080 60iGOP StructureIBBP/IBP optionalAudio EncodingEncoding FormatMPEG1 LayerII AACBitrate64/128/256/384KbpsSampling Frequency48/44.1/32KHzSupport volume adjustmentSupport SDI/HDMI embedded audioTS Over IPProtocolUDP RTPTS over IP output can be turned on and offSupport unicast, multicast modeThe number of TS packets contained in UDP packets can be adjusted from 1 to 7The IP output protocol is implemented by FPGA hardware. After the transmission link is restored, the signal is restored instantly.Stream OutputSupport ASI and IP simultaneous outputSDT parameters can be modifiedStream fluctuation can be controlled by turn on or turn off empty packetsSupport UDP, RTP protocolDVB-ASI Serial Data InputConnectorBNC, 75ΩData PatternByte, Burst adaptivePackage Length188, 204 adaptiveDVB-ASI Serial Data OutputConnectorBNC, 75ΩData Transfer Rate270Mb/sData PatternBytePackage Length188, 204 optionalSignal Level800mV±80mVPhysical SpecificationsTemperature Range0~+40℃(operation), -20℃~+70℃(storage)PowerAC 90~260V, 50Hz/60Hz, redundant twp power suppliesHumidity＜85%Dimension(L×W×H)485mm×350mm×44mm(19 inches 1U chassis)Net Weight6.2KG
会员价：
￥
0
RMB
市场价：
￥
0
RMB
发布时间：
2019
-
07
-
01
-
![Analog Audio OVer Fiber Converter]( "Analog Audio OVer Fiber Converter")
Product Physical MapProduct Feature❖ 24bit digital encoding❖ Single-stage transmission distance up to 120KM❖ System topology can be point-to-point, point-to-multipoint❖ Large audio dynamic range❖ Plug and play❖ The working status is clearly indicated, and the panel is equipped with LED indicators for input/output audio, optical signal, internal status, and power supply.SpecificationParameterTypical ValueAudio InputInput 1 to 8 channel analog mono audio for 1U rack(9 to 16 channel analog mono audio for 2U rack available)Frequency Bandwidth20Hz~20KHz@-0.5dBMaximum Input Level17.4VP-P（+18dBm)Input Impedance600Ω(balanced)ConnectorXLRAudio OutputOutput1 to 8 channel analog mono audio for 1U rack(9 to 16 channel analog mono audio for 2U rack available)Frequency Bandwidth20Hz~0KHz@-0.5dBMaximum Input Level17.4VP-P（+18dBm)Signal to Noise Ratio＞86dB(Unweighted）Total Harmonic Distortion＜0.2%Channel Isolation＞90dB@1KHz ＞90dB@20KHzOptic and Physical CharacteristicsWavelength1310nm or 1550nm (Subject to actual measurement)TX power/RX sensitivity-5dBm~0dBm/-30dBm~-12dBm PowerAC 220V Temperature Range-30°C~+70°C(operation), -20°C~+80°C(storage)Transmission Distance0~100KM(Actual distance is determined by customer’s requirement)Optical ConnectorFC/PC or FC/APCDimension19 inch 1U Rack, 48×320×44mmRear Panel YUK402YUK404YUK408YUK416ApplicationNotes:1.Transmission distance 0-40KM,40-80KM, 80-100KM optional.2.Optical interface FC/PC, FC/APC. Fiber patch cable is available for other interface.
会员价：
￥
0
RMB
市场价：
￥
0
RMB
发布时间：
2019
-
07
-
01