IP+3G-SDI Fiber Optic Extender

发布时间 2019-07-01

点击次数 311

产品名称：
IP+3G-SDI Fiber Optic Extender

上市日期： 2019-07-01

YUK100-HD-IP series is a high-reliability, high-performance digital optical transmission equipment suitable for the broadcast and television industry, with broadcast-level transmission quality, full real-time transmission, no delay, and downward compatible with HD/SD-SDI and ASI. The signal format is from 19.4Mbps to 1485Mbps, the system supports DVB-ASI (EN50083-9) and other digital TV format signals, and meets the requirements of industrial grade and related standards of radio and television products.

It (1U rack) can transmit 1 to 6 channel of 3G-SDI and 1 channel bidirectional Gigabit IP signals through single fiber. Each channel has SDI loop out on transmitter, and each channel has dual output on receiver. It can provide reliable high-quality transmission with dual-wide switching power supply redundant hot backup.

Product Physical Map

IP+3G-SDI Fiber Optic Extender

Product Feature

❖ Compatible with HD/SD-SDI and DVB-ASI, adaptive signals HD-SDI,SD-SDI,ASI

❖ High definition TV signal format: HDI 143,177,270,360,540,1485Mbps

❖ Comply with SMPTE259M,SMPTE297M,SMPTE310,SMPTE305(SDTI),SMPTE344, SMPTE292M, SMPTE424M

❖ SDI input has cable equalization and can compensate the loss of cable transmission

❖ Pass the SDI pathology code test

❖ Support single-mode bidirectional transmission(optional)

❖ Dual power redundant backup

Specification

Parameter	Typical Value
Video Input
Input	1 to 6 channel 3G-SDI/ASI+1 channel bidirectional Gigabit IP (IP1000/100/10M adaptive)
Input Automatic Cable Equalization	>250m(270Mbps)(BELDEN8281 cable) >150m(1485Mbps)(BELDEN828 cable)
Data Rate	19.4M~1485Mbps
Impedance	75Ω
Return Loss	>15dB@1485Mbps
Input Level	800mVP-P ±10%
Video Impedance	75Ω
Video connector	BNC
IP Network Management	RJ45
Video Output
Output	2 to 12 channel 3G-SDI/ASI+1 channel bidirectional Gigabit IP (IP1000/100/10M adaptive)
Output Level	800mVP-P ±10%
Rise/Fall time	<270ps@1485Mbps <0.65ns@270Mbps
Calibration Jitter	＜0.1UI@270Mbps ＜0.2UI@1485Mbps
Impedance	75Ω
Connector	BNC
Optic and physical characteristics
Wavelength	From 1310nm to 1550nm
TX power/RX sensitivity	-5dBm~0dBm/-30dBm~-12dBm
Power supply	AC 220V,<20W
Temperature Range	-30°C~+70°C(operation), -20°C~+80°C(storage)
Transmission distance	0~120KM(Actual distance is determined by customer’s requirement)
Optical connector	FC/PC or FC/APC
Dimension	19 inch 1U Rack, 485×320×44mm

Rear Panel

YUK100-01HD-IP

YUK100-HD-IP Series Digital Video Fiber Optic Extender

YUK100-02HD-IP

YUK100-04HD-IP

Application

YUK100-HD-IP Series Digital Video Fiber Optic Extender

Notes:

1.Transmission distance 0-40KM,40-80KM, 80-120KM.

2.Optical interface FC/PC, FC/APC. Fiber patch cable is available for other interface.

Related recommended products / more

Modular Multi Channel IRD

Product Physical MapYUK700Product Feature❖ Each device can be inserted 6 modules, coding, decoding, multiplexing, adaptation, modulation, transmission,splitter, satellite receiving and cable receiving are optional ❖ Support program multiplexing output and modulated RF signal output ❖ Support ASI input/output, SDI output can choose any input and output function❖ Gigabit IP input/output and SFP fiber output❖ Support HD input and SD output(with down-transformation function)❖ Support logo superposition and signal generator automatic output❖ IP input support RTP or UDP, support 8 MPTS and 64 SPTS input❖ IP output support RTP or UDP, support 8 MPTS and 64 SPTS output❖ Local monitoring: button and LCD display❖ Remote control: TCP/IP, XML❖ Suppport power cut memory function❖ Standard 1U rack (485mm×450mm×44mm)❖ Plug in card, dual power supply, buzzer alarmModule Option2-ch HD/SD Video Encoder Module 2-ch Audio Encoder Module ❖Input: 2 x HD/SD-SDI, 2 x HDMI ❖Video input format: NTSC/PAL adaptive ❖Input resolution: 1080I@50/59.94/60 720P@50/59.94/60, 576I/50 480I/60❖Encoding format: MPEG-2 H.264 optional❖Output bitrate: VBR, CBR❖Video bitrate: HD 8-20M, SD 2-15M❖Audio input：SDI HDMI embedded audio❖Encoding rate：64K to 384K❖Each module support 2 channel encoding❖Input: 2×analog stereo,2×AES/EBU ❖Audio encoding format: MPEG-1 Layer II, AAC-HE, AAC-LC ❖Sampling frequency: 48KHz❖Audio interface: small XLR❖Audio bitrate: 64 to 384K❖Each module support 2 channel encodingDVB-C/T/T2 ISDBT ATSC Receiver ModuleDVB-S/S2/S2X Receiver Module❖Input: 2×RF input❖Support 2 channel DVB-C/T/T2 ISDBT ATSC input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption❖Input: 2×RF input❖Support 2 channel DVB-S/S2/S2X input❖Support 2 sets CAM cards to descramble the signal❖Support BISS-1 and BISS-E decryption1-ch Video Decoder Module2-ch Audio Decoder Module❖Output: 1×HD-SDI, 1×HD-SDI (mirror),1×HDMI, 1×analog stereo or digital audio❖Decoding format: H.265, H.264, MPEG2,AVS2, AVS+❖Each module support 1 channel decoding ❖Output: 2×analog stereo and 2×AES/EBU❖Audio decoding format: MPEG-1 Layer II, AAC-HE, AAC-LC❖AES/EBU: 3-pin small XLR connector❖Analog stereo: 5-pin small XLR connector Modulator ModuleLive Streaming Decoder Module❖Support 1×ASI input , 2×ASI loop out and 1×RF output❖Support DVBC, DVBT, DMBT❖Support 16/32/64/128/256/64B/256B QAM❖Each Module support modulation of four adjacent channels ❖Output level: 120dBμV❖Support stream re-multiplexing❖Support PSI/SI automatic or manual insert edit function(PAT, PMT, CAT, NIT, SDT/BAT information sheet)❖Program, PID filtering and re-image❖Support IP input❖Multiple output, HDMI SD/HD-SDI AES/EBU analog stereo❖Support H.265 H.264 MPEG2 AVS+ decoding❖Support RTMP RTSP HLS HTTP SRT❖Support DRA AC3 EAC3 AAC MPEG❖Compatible with HD/SD signals Multiplexer Module4x1 Splitter Module❖Input: 3×ASI, BNC 75Ω❖Output: 2×independent ASI , BNC 75Ω❖Single ASI bitrate: 0 to 200MPS❖Support 1×12G/3G/HD/SD-SDI ASI input❖Support 4×12G/3G/HD/SD-SDI ASI output❖If the power is off, one of the SDI OUT1 can still output SDI input (IN1) normallySDI Fiber Converter Module(Bi-directional)SDI Fiber Converter Module(Uni-Unidirectional)❖Support 1 channel 12G 3G HD SD-SDI, ASI bi-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional❖Support 2 channel 12G 3G HD SD-SDI, ASI uni-directional transmission over single fiber❖Input: SDI/ASI adaptive ❖Fiber: single mode single fiber❖Fiber connector: LC/PC (standard)❖Transmission distance: 0-100km optional

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 06 - 04
1 ch HD SD Encoder with Mux

Product Physical Map YUK2000-1Product Feature❖ Support video input: one channel HD/SD-SDI HDMI input❖ Support audio input: HD/SD-SDI embedded audio, HDMI embedded audio, AES/EBU, analog stereo❖ Support encoding format: H.264 MPEG-2❖ Support VBR and CBR encoding mode❖ IP input: 1 Gigabit RJ45 to input multicast IP stream❖ IP output: output multicast IP stream after multiplexing, IP transport protocol UDP RTP❖ 2 ASI input, 2 ASI output independently❖ Support re-mux and demux function❖ Support High Definition input, Standard Definition program output (with down conversion function)❖ Support multiple resolutions of 1080I/720P/576I/480I❖ Support PID remapping, PCR correction❖ Support low latency encoding ❖ Support LCD display/key operation❖ Plug-in dual power supply, support buzzer alarmSpecificationParameterTypical ValueBasic InformationInput1×HD/SD-SDI(BNC), 1×HDMI, 1×AES/EBU(XLR)1×analog stereo(XLR), 2×ASI(BNC)Output2×ASI(BNC), 1×Gigabit IP (RJ45) (also can be used as IP input)Video EncodingEncoding FormatH.264 MPEG-2Bitrate512Kbps-20Mbps, 4:2:0 8bitBitrate ControlVBR CBR optionalResolution576i/ 576p/ 720p/ 1080 50i/ 1080 60iGOP StructureIBBP/IBP optionalAudio EncodingEncoding FormatMPEG1 LayerII, AAC-LC, AAC-HEBitrate64/128/256/384KbpsSampling Frequency48/44.1/32KHzSupport volume adjustmentSupport SDI/HDMI embedded audioTS Over IPProtocolUDP RTPTS over IP output can be turned on and offSupport unicast, multicast modeThe number of TS packets contained in UDP packets can be adjusted from 1 to 7The IP output protocol is implemented by FPGA hardware. After the transmission link is restored, the signal is restored instantly.Stream OutputSupport ASI and IP simultaneous outputSDT parameters can be modifiedStream fluctuation can be controlled by turn on or turn off empty packetsSupport UDP, RTP protocolDVB-ASI Serial Data InputConnectorBNC, 75ΩData PatternByte, Burst adaptivePackage Length188, 204 adaptiveDVB-ASI Serial Data OutputConnectorBNC, 75ΩData Transfer Rate270Mb/sData PatternBytePackage Length188, 204 optionalSignal Level800mV±80mVPhysical SpecificationsTemperature Range0~+40℃(operation), -20℃~+70℃(storage)PowerAC 90~260V, 50Hz/60Hz, redundant twp power suppliesHumidity＜85%Dimension(L×W×H)485mm×350mm×44mm(19 inches 1U chassis)Net Weight6.2KG

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01
2 to 4 ch H.264 Encoder

Product Physical MapYUK2000-2YUK2000-4Product Feature❖ Support video: maximum 4 channel HD/SD-SDI HDMI input❖ Support audio: HD/SD-SDI embedded audio, HDMI embedded audio❖ Support encoding format: H.264 MPEG-2❖ Support CBR and VBR❖ IP output: output multicast unicast IP stream after multiplexing, IP transport protocol UDP RTP❖ 2 ASI input, 2 ASI independent output❖ Support mux re-mux and demux function❖ Support High Definition input, Standard Definition program output (with down conversion function)❖ Support multiple resolutions of 1080I/720P/576I/480I❖ Support PID remapping, PCR correction❖ Support low latency encoding❖ Support LCD display/key operation❖ Plug-in two power supplies, support buzzer alarmSpecificationParameterTypical ValueBasic InformationInputMax 4×HD/SD-SDI(BNC), 4×HDMI, 2×ASI(BNC)Output2×ASI(BNC), 1×Gigabit IP (RJ45) (also can be used as IP input)Video EncodingEncoding FormatH.264 MPEG-2Bitrate512Kbps-20Mbps, 4:2:0 8bitBitrate ControlVBR CBR optionalResolution576i/ 576p/ 720p/ 1080 50i/ 1080 60iGOP StructureIBBP/IBP optionalAudio EncodingEncoding FormatMPEG1 LayerII AACBitrate64/128/256/384KbpsSampling Frequency48/44.1/32KHzSupport volume adjustmentSupport SDI/HDMI embedded audioTS Over IPProtocolUDP RTPTS over IP output can be turned on and offSupport unicast, multicast modeThe number of TS packets contained in UDP packets can be adjusted from 1 to 7The IP output protocol is implemented by FPGA hardware. After the transmission link is restored, the signal is restored instantly.Stream OutputSupport ASI and IP simultaneous outputSDT parameters can be modifiedStream fluctuation can be controlled by turn on or turn off empty packetsSupport UDP, RTP protocolDVB-ASI Serial Data InputConnectorBNC, 75ΩData PatternByte, Burst adaptivePackage Length188, 204 adaptiveDVB-ASI Serial Data OutputConnectorBNC, 75ΩData Transfer Rate270Mb/sData PatternBytePackage Length188, 204 optionalSignal Level800mV±80mVPhysical SpecificationsTemperature Range0~+40℃(operation), -20℃~+70℃(storage)PowerAC 90~260V, 50Hz/60Hz, redundant twp power suppliesHumidity＜85%Dimension(L×W×H)485mm×350mm×44mm(19 inches 1U chassis)Net Weight6.2KG

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01
Digital Audio Over Fiber Coverter

Product Physical MapProduct Feature❖ Input/output AES/EBU signal, compatible with AES3, S/PDIF❖ Output signal complies with the national standard GY/T156-2000 GY/T158-2000 GY/T187-2002❖ Input AES signals compatible with various sampling frequencies, making the interconnection of equipment more convenient❖ Input each AES signal without synchronization, the optical transceiver is equipped with a phase-locked loop self-synchronization function❖ Dual power supply redundant backupSpecificationParameterTypical ValueAudio InputInput1 to 16 channel unidirectional or 1 to 8 channel bidirectional AES/EBU digital audio inputInput Level0.2~7.0VP-PInput Sampling Frequency32KHz~108KHzImpedance110Ω(balanced)ConnectorXLRAudio OutputOutput1 to 16 channel unidirectional or 1 to 8 channel bidirectional AES/EBU digital audio outputOutput Level5VP-POutput Sampling Frequency48KHz(or request)Rise/Fall TimeJitterImpedance110Ω(balanced)ConnectorXLROptic and Physical CharacteristicsWavelength1310nm or 1550nm (Subject to actual measurement)TX power/RX sensitivity-5dBm~0dBm/-30dBm~-12dBm PowerAC 220VTemperature Range-30°C~+70°C(operation), -20°C~+80°C(storage)Transmission Distance0~120KM(Actual distance is determined by customer’s requirement)Optical ConnectorFC/PC or FC/APCDimension19 inch 1U Rack, 48×320×44mmApplicationNotes:1.Transmission distance 0-40KM,40-80KM, 80-120KM optional.2.Optical interface FC/PC, FC/APC. Fiber patch cable is available for other interface.

会员价：￥ 0 RMB

市场价：￥ 0 RMB

发布时间： 2019 - 07 - 01

Products / 相关产品

IP+3G-SDI Fiber Optic Extender

2019 - 07 - 01

Product Physical MapProdu...

more>>